Sears 831.297140 user manual Console Wire Harness is not pinched

Page 6

3.With the help of a second person, hold the Console Base

(6) and the other Handrail (2) near the right Upright (14) as shown. Note: It may be helpful to rest the other side of the Console Base on the left Handrail.

Connect the Console Wire Harness (88) to the two plugs on the Upright Wire Harness (26). Refer to the upper inset drawing. Locate the 7 1/2” Wire Ties (10) on the Console Wire Harness (88) and the Upright Wire Harness (26). Slide the Wire Ties against the plugs as shown. Insert the 11 1/2” Wire Tie (55) through the holes in the Wire Ties. Close and tighten the 11 1/2” Wire Tie.

Refer to the lower inset drawing. Insert the Wire Harnesses (26, 88) into the Right Upright (14). Note: If necessary, bend the Wire Harnesses into an “s” shape.

Route the Console Wire Harness (88) through the notch in the bracket on the right Handrail (2) as shown. Insert the bracket into the right Upright (14). Make sure that the

Console Wire Harness is not pinched.

4.Thread a Handrail Bolt (15) with a Handrail Washer (16) into the right Upright (14) and the right Handrail (2). Do not tighten the Handrail Bolt yet. Tighten a Handrail Screw (32) into the lower end of the Handrail. Be sure to push on the head of the Handrail Screw while tightening it. Next, tighten the Handrail Bolt (15).

Place the Console Base (6) on the left and right Handrails

(2). Attach the Console Base with four Console Screws (13).

5.Attach the Storage Latch (12) to the left Upright (14) with two Latch Screws (13). Be careful not to overtighten the Latch Screws.

6.Remove the backing from the Adhesive Clip (74). Press the Adhesive Clip onto the Upright Base (14) in the indi- cated location. Press the Allen Wrench (73) into the Adhesive Clip.

To protect the floor or carpet, place the Treadmill Mat (92) under the treadmill.

7.Make sure that all parts are tightened before you use the treadmill.

3

6

 

88

 

 

10

 

 

 

 

 

 

 

 

55

 

 

 

 

2

 

 

 

88

10

 

 

 

 

26

 

 

26

 

 

 

 

 

 

 

14

88

 

 

26

2

 

 

 

 

14

 

4

 

 

 

 

 

 

6

 

13

 

 

 

 

 

 

13

 

15

 

 

 

 

 

 

2

 

16

 

 

 

 

 

 

 

 

14

 

 

32

 

 

5

 

 

 

 

 

14

 

 

 

 

 

13

 

 

 

 

12

 

 

6

 

 

 

 

 

 

14

92

 

 

 

 

73

 

 

 

74

 

 

6

Image 6
Contents Model No Serial No Table of Contents Important PrecautionsPage Before YOU Begin Right SideBack Assembly Phillips screwdriver and adjustable wrenchConsole Wire Harness is not pinched Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Diagram of the Console Battery InstallationStep by Step Console Operation HOW to Change the Incline of the Treadmill CALORIES/FAT CALHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Symptom the Power Turns OFF During USE TROUBLE-SHOOTINGSymptom the Power does not Turn on TopSymptom the Walking Belt Slows When Walked on Symptom the Walking Belt is OFF-CENTER When Walked onSymptom the Incline System Sticks Exercise Intensity HOW to Measure Your Heart RateConditioning Guidelines Workout GuidelinesSuggested Stretches R0198A Key No. Qty DescriptionExploded DRAWING-Model No Full 90 DAY Warranty Model NoSEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL