Stamina Products 35-1400A owner manual Fan Assembly

Page 7

ASSEMBLY INSTRUCTIONS

Fan Assembly

Roller

STEP 3

Slide the SEAT(54) onto the RAIL(1). Attach the REAR STAND(2) onto the RAIL(1) with HEX HEAD

BOLTS(M8 x 15mm)(70).

NOTE: 1. Refer to the inset drawing. If it is difficult to slide the SEAT(54) onto the RAIL(1), turn the NYLOCK NUT(M6)(75) located on the SEAT CARRIAGE(55) counter-clockwise to adjust the position of the Roller lower.

2.If the SEAT(54) rocks on the RAIL(1), turn the NYLOCK NUT(M6)(75) located on the SEAT CARRIAGE(55) clockwise to tighten the Roller.

STEP 4

Remove the LOCKING KNOB(44) from the SUPPORT FRAME(4). Remove the PULL PIN(43) from the RAIL(1). Unfold the FAN ASSEMBLY by swinging the SUPPORT FRAME(4) toward the front.

Image 7

Contents Stamina Products Weight on this product should not exceed 250 lbsTable of Contents Safety InstructionsCall US First AIR Rower Before YOU BeginMillimeters Hardware Identification ChartStep Assembly InstructionsFan Assembly Wooden PEDAL45 Functions Using the Electronic MeterHOW to Install and Replace Batteries Function ButtonStorage MaintenanceSupport FRAME4 Exercise Intensity Conditioning GuidelinesWARM-UP and COOL-DOWN Warranty Limited WarrantyFront Product Parts DrawingBack QTY DIAGRAM# Part NameDIAGRAM# Part Name QTY Page Telephone FAX Online Mail FAX/MAIL Ordering Form