USING THE ELECTRONIC METER
POWER ON : Wooden Pedal movement or push the
BUTTON.
POWER OFF : Automatic shut off after 2 minutes of inactivity.
FUNCTION BUTTON:
Press the button to select functions.
Reset all functions to zero by pressing the button and holding it down for three seconds.
FUNCTIONS:
SPM: Displays the current Stroke/Min, from zero to 9999 Stroke/Min.
COUNTER: Displays the total number of rows you have taken, from zero to 9999 rows.
DISTANCE: Displays the distance, from zero to 999.9 miles.
SPEED: Displays the current speed, from zero to 999.9 Mile/Hr.
TIMER: Displays the time, from 1 sec. up to 99:59 minutes.
CALORIES: Displays the calorie consumption, from zero to 999.9 cal.
The calorie readout is an estimate for an average user. It should be used only as a comparison between workouts on this unit.
NOTE: The meter will shut off automatically after 2 minutes of inactivity. All function values will be kept. Push the MODE button and hold it down for three seconds to reset all functions to zero.
HOW TO INSTALL AND REPLACE BATTERIES:
1.Open the Battery Door on the back of the meter.
2.The meter operates with two AA batteries, two batteries included. Refer to the illustration to install or replace the batteries.
NOTE:
1.Do not mix a new battery with an old battery.
2.Use the same type of battery. Do not mix an alkaline battery with another type of battery.
3.Rechargeable batteries are not recommended.
AA Batteries
9