Stamina Products 35-1400A owner manual Wooden PEDAL45

Page 8

ASSEMBLY INSTRUCTIONS

STEP 5

Lock the SUPPORT FRAME(4) on the RAIL(1) with the LOCKING KNOB(44). Insert the PULL PIN(43) into the hole on the RAIL(1) for storage.

STEP 6

Install two "AA" batteries into the METER(35), two batteries included. Connect the UPPER CONNECTION WIRE(33) and LOWER CONNECTION WIRE(37) to the METER(35). Press the METER(35) into the CONSOLE(36).

NOTE: See page 9 for detailed battery installation instructions.

STEP 7

Connect the LOWER CONNECTION WIRE(37) to the COUNTER SENSOR(38) located under the

WOODEN PEDAL(45).

8

Image 8

Contents Weight on this product should not exceed 250 lbs Stamina ProductsSafety Instructions Table of ContentsCall US First Before YOU Begin AIR RowerHardware Identification Chart MillimetersAssembly Instructions StepFan Assembly Wooden PEDAL45 Using the Electronic Meter HOW to Install and Replace BatteriesFunction Button FunctionsSupport FRAME4 MaintenanceStorage Conditioning Guidelines Exercise IntensityWARM-UP and COOL-DOWN Limited Warranty WarrantyBack Product Parts DrawingFront DIAGRAM# Part Name QTYDIAGRAM# Part Name QTY Page FAX/MAIL Ordering Form Telephone FAX Online Mail