Stamina Products 35-1399 owner manual Assembled at the factory

Page 10

ASSEMBLY INSTRUCTIONS

STEP 6

Slide the SEAT(66) onto the RAIL(2). Attach the STOPPER BUMPER(56) to the RAIL(2) with BUTTON HEAD BOLTS(M8x1.25x25mm)(22). Also, please verify that the other STOPPER BUMPER(56) have already been assembled at the factory. If it has not been pre-assembled, then please assemble at this time.

STEP 7

Attach the REAR STAND(3) to the RAIL(2) with a HEX BOLT(M8x1.25x15mm)(59) and a LOCK WASHER(M8)(34) from inside the RAIL(2) and two FLAT HEAD BOLTS(M8x1.25x15mm)(57) from underneath. Tighten all three bolts only after all three have been started. Press the RAIL CAP(53) into the back end of the RAIL(2).

(Assembled at the factory)

10

Image 10

Contents This Product is Produced Exclusively by Stamina ProductsTable of Contents Safety InstructionsCall Us First Before YOU Begin Air RowerEquipment Warning & Notice Labels Label is larger than actual sizeHardware Identification Chart Assembly Instructions StepWheel Assembly Instructions Assembled at the factory PINS54 Operational Instructions Using the Fitness MeterHOW to Install and Replace Batteries Function ButtonMaintenance StorageConditioning Guidelines WARM-UP and COOL-DOWN Product Parts Drawing Parts List Part Name QTYPART# Part Name QTY Limited Warranty WarrantyPage Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO