OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
POWER ON : Pull the HANDLEBAR(16) or push the button.
POWER OFF : Automatic shut off after four minutes of inactivity.
FUNCTION BUTTON:
Press to select the function value displays of DISTANCE, TIME, and CALORIES.
Reset all functions to zero by pressing the button and holding it down for four seconds.
FUNCTIONS:
DIST
TIME
CAL
MODE
SPEED: Displays the current speed on upper display from zero to 999.9 miles per hour.
SCAN: Lower display automatically scans each function of DISTANCE, TIME, and CALORIES in sequence every six seconds.
DISTANCE: Displays the distance from zero to 99.9 miles.
TIME: Displays the time from one second up to 99:59 minutes.
CALORIES: Displays the calorie consumption from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a comparison between workouts on this unit.
NOTE: The meter will shut off automatically after four minutes of inactivity. All function values will be kept. Press the MODE button and hold it down for four seconds to reset all functions to zero.
AA Batteries
HOW TO INSTALL AND REPLACE BATTERIES:
1. Use your hand or a simple tool to pry the METER(67) from the side covers.
2. The meter operates with two AA batteries, the batteries are not included. Refer to the illustration to install or replace the batteries.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with another type of battery.
3. Rechargeable batteries are not recommended.
12