Navini Networks, Inc. | PMX User’s Guide |
Optional
Desktop
Antenna
An optional desktop antenna is available for the PMX. This antenna connects to the PMX and then sits on a surface next to the laptop. This antenna should be used if optimal reception cannot be obtained through the original PMX antenna.
To connect the desktop antenna to the PMX, you must first remove the original antenna attached to the PMX. To remove the antenna, turn the antenna down so that it is lying parallel with the PMX.
Grasp the base of the antenna near its connection point and firmly pull the antenna away from the card. Do not grasp the top or middle of the antenna as it may break when you try to pull on the antenna.
Once the original antenna is removed, connect the desktop antenna by inserting its connector into the port on the PMX card.
Insert the other end of the antenna cable into the base unit.
Base
Note: Avoid frequently connecting and disconnecting the desktop antenna from the PMX, as this may cause the connector on the desktop antenna to break.
Page 25