Navini Networks, Inc. | PMX User’s Guide |
Safety
To optimize safety and expedite installation and service, read this document thoroughly. Follow all warnings, cautions, and instructions marked on the equipment and included in this document.
To aid in the prevention of injury and damage to property, cautionary symbols have been placed in this document to alert the reader to known potentially hazardous situations, or hazards to equipment or procedures. The symbols are placed before the information to which they apply. However, any situation that involves heavy equipment and electricity can become hazardous, and caution and safety should be practiced at all times when installing, servicing, or operating the equipment.
Caution Symbol - possible equipment or property damage.
Warning Symbol - could cause personal injury or otherwise be hazardous to your health
Navini Networks, Inc., expressly requires that when using Navini electronic equipment always follow the basic safety precautions to reduce the risk of electrical shock, fire, and injury to people and/or property.
1.Follow all warnings and instructions that come with the equipment.
2.Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the equipment to water could cause severe electrical shock or serious damage to the equipment.
3.Do not allow any type of liquid to come in contact with the equipment. Unplug the equipment from the power source before cleaning. Use a damp cloth for cleaning. Do not use any soaps or liquid cleaners.
4.Follow all airport and FAA regulations when using the equipment on or near aircraft.
5.Do not use the PMX near medical equipment, life support equipment, or any equipment that may be susceptible to any form of radio interference. In such areas, the PMX must be powered off.
6.The driver or operator of any vehicle should not operate the PMX while in control of a vehicle. Doing so will detract from the driver or operator’s control and operation of the vehicle.
7.Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks and also voids the warranty. Incorrect reassembly can cause equipment damage or electrical shock. Only an authorized repair technician should service this product.
8.Do not expose the equipment to extreme hot or cold temperatures.
9.Do not use the equipment under the following conditions:
•When the equipment has been exposed to water or moisture.
•When the equipment has been damaged.
•When the equipment does not operate properly or shows a distinct change in performance.
Page 4