LogMan, Transfer Files to PC | Johnson Controls 1 instruction

Transfer Files to PC

Transfer logs from the LogMan II to the LogView PC as follows. Note that logs are automatically deleted from the LogMan II after transfer to the PC.

Step

Action

1Place the LogMan II in the docking station and verify that the USB cable is connected to the docking station and the PC.

2Start LogView.

3Select the drive where you store log files from the Select Archive Drive dropdown list on the left side of the LogView window.

4Open (double-click) the folder in which to save the log files in the Select Archive Path list box.

5Select Retrieve > Psion Link from the LogView menu. The Psion Link dialog opens.

6Select LOGMAN II from the DEVICE dropdown list in the Psion Link dialog.

7Select Copy Logs - PC< - from the Command dropdown list. Click Execute.

8When the STATUS line reads Copy Finished, click Close.

For More Information

For more information, please see the LogMan II User Manual included on the CD-ROM. To contact Johnson Controls about this product, please visit our website at www.myrefcon.com.

Getting Started

LogMan II

Revision 1.0

Description

The LogMan II is a portable device for the retrieval and transfer to PC of refriger- ated container data for cargo

handlingverificationand documentation.

The LogMan II is fully supported by the LogView application and works with all major reefer controllers.

The unit is simple to use and ruggedly built to withstand the hard environment of container terminals and shipboard transport.

In addition to log retrieval, the LogMan

II allows the user to:

•Set controller date and time

•Set container (or genset) ID

•Set container trip start date

•Store load and discharge ports

•Enter temperature probe correction values

•Store a container comment

•Calibrate temperature probes

•Update controller firmware

•View genset fuel level, set tank size and low-fuel warning level