VocoPro IR-9000 Troubleshooting, There is no power, There is no sound or the sound is unclear

Troubleshooting

There is no power

•Make sure the correct power adapter is connected to the reciever

•If using a surge protector / power strip, make sure it is plugged in and switched on

•Make sure all power connections are fully connected

There is no sound or the sound is unclear

•Make sure all cables are fully inserted into the correct inputs and outputs. See the Getting Connected section in this manual for detailed instructions on setting up the IR-9000.

•Make sure all of the volume controls on the IR-9000 and on your other components are turned up

•Make sure there is no barrier between the microphones and the infrared sensor(s)

•Make sure the microphones are charged

•Move closer to the receiver or one of the other infrared sensors. Add another infrared sensor to the room if necessary.

14