VocoPro IR-9000 owner manual Connecting the External Infrared Sensors

Getting Connected cont.

Connecting the External Infrared Sensor(s)

The IR-9000 can connect up to two external infrared sensors. One is included and a second one can be purchased from your nearest VocoPro dealer.

1.Connect The RCA end of the sensor to one of the External Sensor Inputs on the rear panel of the reciever unit

2.Position the sensor in a place where there are no barriers between it and the microphones

NOTE: Infrared signals cannot travel through walls or other dense objects, so make sure there is an open path between each microphone and the IR sensor(s).

IR sensor

IR-9000 rear panel

10