VocoPro IR-9000 owner manual Descriptions and Functions

Descriptions and Functions cont.

Microphone

1.Power Switch - Turns the microphone’s power on and off

2.Power indicator LED - Indicates when the microphone’s power is on.

4.IR Transmitter - This lens emits the infrared signal to the sensor on the receiver. Note: Keep hands away from this part of the microphone, as it may block the infrared signal.

4.Gain Control - Turn this control clockwise to increase the gain output of the microphone, turn counter-clockwise to decrease.

5.Signal Hi/Lo Switch - Use this switch to toggle from a “hi” or “lo” signal strength that will give your microphone signal an extra boost if you would like to extend the range of the microphone. Note: The high setting will cause more power use and drain the battery faster than the low setting.

�

�

� � �

Microphone Charger

1.Charging slots - Place the microphones in these slots to charge.

2.LED charge indicators - indicate the charge level of each microphone. Red indicates that the microphone is charging and green indicates that the microphone is charged.

�

�

13