VocoPro IR-9000 Getting Connected cont, rear panel, KJ-7800PRO, Gig-Master, front panel, Fig. C

Getting Connected cont.

Connecting to a Mixer, amplifi er or other audio input device

The IR-9000 allows you to either connect each microphone channel individually to separate channels using the CH.1 and CH.2 outputs (Fig. C) or both microphone channels together through the MIXED output (Fig. D).

Connecting Each Microphone Channel Individually (Fig. C)

What you will need:

•Two ¼” Microphone Cables

•A mixer, amplifi er or other audio input device with two available ¼” microphone inputs

1.Connect one end of each ¼” microphone cable to the CH.1 and CH. 2 outputs on the rear panel of the reciever unit

2.Connect the other ends to the ¼” microphone input channels on a mixer, amplifi er or other audio input device

Connecting Both Microphone Channels to One Input (Fig. D)

What you will need:

•One ¼” Microphone Cable

•A mixer, amplifi er or other audio input device with one available ¼” microphone input

1.Connect one end of the ¼” microphone cable to the MIX ¼” output on the rear panel of the reciever unit

2.Connect the other end to the ¼” microphone input channel on a mixer, amplifi er or other audio input device

(Fig. C) (Fig. D)

���������������������������������������

(BALANCED) (BALANCED) (BALANCED) (BALANCED)

IR-9000	IR-9000
rear panel	rear panel

KJ-7800PRO	GIG-MASTER
	front panel
front panel

	��	��		��		��
�	GAIN ��	�	GAIN ��	�	GAIN ��	�	GAIN ��
	�		�		�		�
���	���	���	���	���	���	���	���
	TREBLE		TREBLE		TREBLE		TREBLE
	�		�		�		�

9