English
Driver Uninstallation
Follow the steps below to remove the the SMC EZ Connect USB Network Bridge driver from Windows system:
1.Click the Start menu, point to Settings\Control Panel. Double click Add/Remove Programs icon.
2.In Install/Uninstall tab, select SMC EZ Connect USB Network
Bridge Driver V1.5.0.0
3.Click Add/Remove button and then click OK.
4.Restart Windows system.
Troubleshooting
If you have successfully installed the driver, but can’t see either your or the other computers’ names in Window’s Network Neighborhood, please check the following points.
1.Make sure the EZ Connect USB Cable is firmly connected to the USB ports on your computer or USB hubs.
2.Click the Start menu, point to Settings`Control Panel. Double click Network icon. In Identification tab, ensure each computer has been given a unique name, not to conflict with each other. Make sure the Workgroup name is the same for all the computers in the network
3.In Configuration tab, check the
“SMC EZ Connect USB Network Bridge Adpater” is in The following network components are installed list.
4.In Configuration tab, click File and Print Sharing button. Make sure both I want to be able to give others accesss to my files and I want to be able to allow others to print to my printer(s) functions are selected. It would cause the File and printer sharing for microsoft networks service be installed and enable this computer to share its files and printers to the others
After checking all these points, if the network is still not working properly, please contact your supplier instead of revising the settings by yourself unless you are an expert network user.
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial damage, including but not limited to special, incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the express written permission of the manufacturer.
All brand names and product names used in this document are trademarks, or registered trademarks of their respective holders.
English
