Graham Field 760000-INS-LAB-RevA08 user manual Operation

Page 10

sCaution: Place the device in a position where the care- giver and/or doctor can access it easily.

5.Connect the mattress-pump air hose quick connector; ensure that the connector has clicked securely into place before continuing.

sCaution: Ensure that the air hoses are not kinked or tucked under the mattress.

WARNING: Locate all cords so that they will not be stepped on, tripped over, or otherwise subjected to damage or stress.

WARNING: Do not use a household extension cord if the electrical cord does not reach the power outlet. Use of an improper extension cord could result in fire and electric shock. If an extension cord must be used, use a three conductor cord with ground, properly wired, in good electrical condition, and keep it as short as possible.

WARNING: Ensure that the local power voltage is appropriate for the pump unit.

6.Plug the power cord into a properly grounded electrical outlet.

Operation

1.Turn the main power switch to the ON position.

2.Press the front panel power button. The power indica- tor will illuminate.

10

main power switch

power button

760000-INS-LAB-RevA08

Image 10
Contents 760000 Contents Introduction Important safety precautionsIntended use of this device INS-LAB-RevA08 Equipment Symbols Functional earth for UL only Class II for UL onlyPump and mattress system Product descriptionPump front Front panel third row therapy mode adjustment Front panel first row cycle time adjustmentFront panel second row pressure adjustment Pump rearFront panel fourth row Pump and Mattress Installation InstallationUnpacking Operation Pressure adjustment Quick disconnectTransport cap MaintenanceCleaning CPR functionFuse replacement General MaintenanceAir filter replacement Pump Specification SpecificationsStorage Warranty Mattress SpecificationINS-LAB-RevA08 GF Health Products, Inc