2 Attach Shelter to Frame
a) Clip center of shelter roof to bottom of hub.
b) Clip shelter to frame, positioning
doors in desired direction (Illus. 3). c) Corners have two clips, so snap
one into clip bracket.
d) To fully extend each pole, interlock all
e) Insert straight pin into base of pole (Illus. 4).
Illustration 3
3 Stake Down Shelter
a)Adjust poles to pull shelter taut and insert larger stake downward through fabric loop at end of each pole (Illus. 5).
b)Attach guylines to fabric and stake down using metal stakes (Illus. 6).
Guyline 
Illustration 6 Assembled shelter with guylines extended.
Illustration 4
Insert straight pin into
base of pole | Illustration 5 |
| Insert stake through |
| stake loop |
Things You Should Know
•Never store shelter, even for a short period of time, without drying thoroughly and brushing off caked dirt. Do not pack stakes or poles inside your shelter. Use separate storage bag.
•STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON FABRIC OR STAKE LOOP TO REMOVE STAKE.
•POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER DURING STORAGE.
•Do not leave your shelter set up for weeks at a time. Be aware that exposure to ultraviolet rays of the sun can seriously damage material and/or cause it to become discolored.
®
THE COLEMAN CO., INC.
3600 N. Hydraulic • Wichita, Kansas 67219
WARNING: KEEP ALL FLAME AND HEAT SOURCES
AWAY FROM SHELTER FABRIC. This shelter meets the flammability requirements of
MADE IN SRI LANKA
PRINTED IN SRI LANKA Rev. 3/04