Transmitter Front
1.Power/Link Indicator Light
•Blinking indicator light - System booting or establishing link between the Transmitter and the Receiver.
•Quick blinking indicator light - Software upgrading or wireless/LAN mode switching.
•Solid indicator light - Link between the Transmitter and Receiver has been established and is ready for signal transmission.
2.HDMI 1
•The HDMI 1 indicator light will be illuminated when the HDMI 1 port is selected for video input.
•If there is no signal, and/or the cable is not connected, the indicator light will blink.
3.HDMI 2
•The HDMI 2 indicator light will be illuminated when the HDMI2 port is selected for video input.
•If there is no signal, and/or the cable is not connected, the indicator light will blink.
4.PC
•The PC indicator light will be illuminated when the PC In port is selected for video input.
•If there is no signal, and/or the cable is not connected, the indicator light will blink.
5.AV
•The AV indicator light will be illuminated when the AV In port (Composite) is selected for the video input.
•If there is no signal, and/or the cable is not connected, the indicator light will blink.
6.IR Window
•IR receiving window enables remote control of components.
7.Power/Source Selection Button
•Press and hold for 3 seconds to turn on the unit.
•When powered on:
ºPress to select the video input source. Each press of the button will cycle through the available video input "HDMI1→ HDMI2→ PC→ AV →HDMI1" in sequence.
ºPress and hold for 8 seconds to turn the unit off.
9 of 36 | ISSUED: |
