Peerless Industries HDS200 Multicast Modes, USB Multicast Set-Up Method, Multicast Wireless Mode

Note: Peer-to-Peer units can be configured to multicast mode using the USB Multicast Set-Up Method or LAN Multicast Set-Up Method. Additional Receivers (HDS200-R) are required and sold separately. Please visit

http://www.hdflow.com/Tech-Support for programming instructions.

Multicast Modes

Multicast Wireless Mode

Multicast Wireless Mode is a pre-configured setting that enables the Transmitter to stream AV media from one Transmitter to up to four Receivers. All multicast systems come preconfigured to wirelessly stream to the specified number of Receivers.

Available Multicast Models
Model	Capability	Mode
HDS200-2: HD Flow Pro Wireless Multimedia Kit: streams to two display devices		Multicast Wireless
HDS200-3: HD Flow Pro Wireless Multimedia Kit: streams to three display devices		Multicast Wireless
HDS200-4: HD Flow Pro Wireless Multimedia Kit: streams to four display devices		Multicast Wireless

Multicast LAN (wired) Mode (Advanced Settings)

Multicast LAN (wired) Mode is an available configuration for applications where wireless signal transfer is not desired, allowed or surpasses wireless distance limitations. This mode allows for the Transmitter to be configured to an existing LAN to transmit AV signal to multiple Receivers. Please visit http://www.hdflow.com/ Tech-Supportfor step-by-step LAN programming instructions.

Note: Additional Receivers (HDS200-R, sold separately) are required when adding on to a peer-to-peer system.

Converting a Peer-to-Peer Wireless HD Flow Multimedia Kit to a Multicast Wireless Multimedia Kit

After the purchase of additional Receiver(s), part number HDS200-R, use the following instructions to add the Receiver(s) to the current system.

USB Multicast Set-Up Method

To set up the HD Flow Pro Multimedia Kit as a multicast system that transmits to 2, 3 or 4 Receivers using the USB Multicast Set-Up Method please visit http://www.hdflow.com/Tech-Supportto view the instructional video.

LAN Multicast Set-Up Method (Advanced Settings)

To set up the HD Flow Pro Wireless Multimedia Kit as a multicast system that transmits to 2, 3 or 4 Receivers using the LAN Configuration Method please reference the instruction manual that comes with the HDS200-R or visit http://www.hdflow.com/Tech-Supportto download instructions.

LAN - Wired Connection Mode

The wired connection mode requires a CAT5e/6 cable to be connected to the LAN ports between the Transmitter and Receiver. HD Flow Pro Wireless Multimedia Kit comes standard with enabled wireless connection. Setup for LAN operation is required. Please visit http://www.hdflow.com/Tech-Supportfor step- by-step LAN programming instructions.

27 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1