Peerless Industries HDS200 user manual Step Connecting the Receiver to the Display Device

Step 3

Connecting the Receiver to the Display Device

Note: Connect the Receiver to the display device using the port with the high resolution capability, HDMI port is preferred. Regardless of the number of analog or digital sources connected to the Transmitter, only one port is required to be connected to the display. Be sure the source resolution matches with the display device's resolution capabilities.

A. HDMI Output to Display

•Connect the HDMI cable from the Receiver's HDMI output to the display device's HDMI input.

B.Composite Output to Display

•Connect the composite RCA cable from the Receiver's AV output to the display device's composite input.

C.Component Output to Display

•Video - Connect the component video (YPbPr) cable from the Receiver's COMPONENT-OUTto the displays device's component input.

•Audio - A 3.5mm-to-RCA stereo audio cable is required (not included) to transmit audio when using this input. Connect the 3.5mm end of the cable to the Receiver's AUDIO-OUTport, then connect the RCA side of the cable to the RCA ports on the display decive.

Step 4

Install the IR Extender by plugging in the provided IR Extender into the IR-INport on the Receiver. (IR Extender use is optional. Use the IR Extender when the Receiver is out of sight or to extend the range of the Receiver's IR reception range.)

Step 5

Powering-up the HD Flow Multimedia Kit

Plug in the power adapters for the Transmitter and the Receiver to available power outlets. Plug in the other end of the power cable to the Transmitter and then to the Receiver. The units will automatically turn on.

Step 6

Turn on your display device (TV, monitor, projector, etc.)

21 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1