Coleman 9260C727 manual Cimmaron 10’x 7’ With Vestibule, Connect Frame to Tent

Cimmaron™ 10’x 7’ With Vestibule

Instructions apply to Part Number 9260C727

When You Are Ready

To Set Up Your Tent

–Select a level campsite clear of rocks, branches and other hard or sharp objects.

–Do not set up your tent under trees.

–For best results in windy conditions, do not position the door of tent into the wind.

POLE ASSEMBLY PARTS

Part No. 9260C722

(2)Main Tent Poles

Part No. 9260C723

(1)Rainfly Pole

Rainfly Part No. 9260C721

1 Layout & Positioning of Tent, Pole Assembly

–Layout and position tent with door facing desired direction. (illus. 1)

–Unzip door.

–Stake down tent corners only, using the rings at the end of the stake loops. Keep the floor taut. (illus. 2)

–Assemble frame poles by interlocking shock-corded poles. This will make two long poles.

–Insert the poles diagonally into pole sleeves.The center of the poles should cross forming an “X” in the middle of tent. (illus. 1)

Assembled poles inserted through pole sleeves

illus. 1

illus. 2 Tent stake

through ring

2 Connect Frame to Tent

– Insert one end of main tent pole end onto pin of pin & ring system, at tent

corner. (illus. 3)

– Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pin into the pole.

– Repeat for second pole.

illus. 4

Tent frame set-up

illus. 3

Insert pole end onto pin & ring