5 minute guide | 02 |
There are several other sound options you can select. See Listening to your system on page 31 for more on this.1 See also The System Setup menu on page 39 for more setup options.
Using the Quick Setup
VSX-517 model only
You can use the Quick Setup to get your system up and running with just a few button presses. The receiver automatically makes the necessary settings after you have selected your speaker setup, room size and listening position.
If you want to make more specific settings, refer to The System Setup menu on page 39.
Use the front panel controls for the steps below.
2.1ch – 3.1ch – 4.1ch – 5.1ch
If you selected NO for the subwoofer setting in step 3, the following choices are available:
2.0ch – 3.0ch – 4.0ch – 5.0ch
•Check the table below to find the speaker setup that corresponds with your system.
English Deutsch Français Italiano
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| MULTI JOG |
|
| PHASE |
|
|
|
| ENTER |
| |
|
| CONTROL |
|
|
|
|
|
| |
PHASE | DIALOGUE AUTO SURR/ | DVD/LD | DVD 5.1 | TV/SAT | DVR/VCR | TUNING | STATION | STEREO/ | ADVANCED |
CONTROL | ENHANCEMENT DIRECT | F.S.SURR | STANDARD SURROUND | ||||||
|
|
|
|
|
|
|
| LISTENING MODE | |
| SOUND | MIDNIGHT/ | VSB |
|
|
|
|
| MASTER |
| RETRIEVER LOUDNESS | MODE | TONE |
|
|
|
| VOLUME | |
STANDBY/ON
PHONES | SIGNAL | TUNER | QUICK |
|
| SELECT DIMMER | EDIT | SETUP | SETUP RETURN |
MULTI JOG
DOWN | UP |
1If the receiver is off, press STANDBY/ON to turn the power on.
2Press QUICK SETUP.
3Use the MULTI JOG dial to choose your subwoofer setting.
Select YES or NO, depending on whether you’ve connected a subwoofer.
4Press ENTER.
5Use the MULTI JOG dial to choose your speaker setup.
If you selected YES for the subwoofer setting in step 3, the following choices are available:
6Press ENTER.
7Use the MULTI JOG dial to choose your room size.
Depending on the distance of your speakers from the listening position, choose between small, medium, or large (S, M or L), M being an
8Press ENTER.
9Use the MULTI JOG dial to choose your listening position.
You can cycle between the following choices:
•FWD – If you are nearer to the front speakers than the surround speakers
•MID – If you are equal distance from the front and surround speakers
•BACK – If you are nearer to the surround speakers than the front speakers
10Press ENTER to confirm your setup.
The display shows the speaker setup, room size and listening position that you have selected.
Nederlands Español
Note
1Depending on your DVD player or source discs, you may only get digital 2 channel stereo and analog sound. In this case, the listening mode must be set to STANDARD (it should already be set – see Listening in surround sound on page 31 if you need to do this) if you want multichannel surround sound.
9
En
