05Listening to your system
Selecting the multichannel analog inputs
If you have connected a decoder or a DVD player with multichannel analog outputs to this receiver (page 14), you must select the analog
multichannel inputs for surround sound.1
•Press DVD 5.1 (SHIFT+DVD) on the remote control or DVD 5.1 on the front panel. To cancel playback from the multichannel inputs, use the INPUT SELECTOR buttons to select a different input signal.
1Make sure you have set the playback source to the proper output setting.
For example, you might need to set your DVD player to output multichannel analog audio.
2Press DVD/LD.
3Press SIGNAL SELECT on the front panel to select the multichannel analog inputs. DVD 5.1ch shows in the display and the ANALOG indicator lights.
Selecting the front audio inputs
When playing back a component connected to the MCACC/AUDIO IN jack on the front panel, set the source to F.AUDIO on the receiver.
1Press F.AUDIO on the remote control. You can also select the source by pressing FRONT AUDIO on the front panel.
2Playback the connected component.
Note
1During playback from the multichannel inputs, you can’t use any of the sound features/modes and only the volume and chan- nel levels can be set.
38
En