09Controlling the rest of your system
Chapter 9:
Controlling the rest of your system
Setting the remote to control other components
Most components can be assigned to one of the MULTI CONTROL buttons using the component’s manufacturer preset code stored in the remote.
However, please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for the manufacturer in the remote control will not work for the model that you are using.
Note
•After one minute of inactivity, the remote automatically exits the operation.
Selecting preset codes directly
|
|
|
| TUNER DISP | CLASS | MPX | D.ACCESS |
| MULTI CONTROL | TV CTRL |
|
|
| ENTER | |
DVD/LD | TV/SAT | DVR/VCR | F.AUDIO | MIDNIGHT | ANALOG ATT |
| DISC |
|
|
|
| DIMMER | SLEEP | ||
|
|
|
|
|
|
| |
CD | FM | AM | RECEIVER | SIGNAL | SB ch |
| +10 |
| F.S.SURRSTEREO/ |
|
|
|
| ||
AUTO SURR | STANDARD ADV.SURR |
|
|
|
| ||
| ACOUSTIC |
| SOUND | INFO | TV CONTROL | ||
PHASE | DIALOG |
|
|
|
| ||
EQ | RETRIEVER |
|
|
|
| ||
|
|
|
| SHIFT | INPUT | TV CH | TV VOL |
|
|
|
| SELECT | |||
2Press the MULTI CONTROL button for the component you want to control.
The LED lights on continuously.
3Use the number buttons to enter the preset code.
You can find the preset codes on page 55.
The LED blinks again after you enter the code.
If the correct code has been input the power of the component being input will turn on or off.
The power of the component being input will only turn on or off if that component is able to be turned on directly by remote control.
•You can only input a code for the component
type written on each MULTI CONTROL button.1
•Even if you don’t input a preset code for the TV (TV/SAT MULTI CONTROL button) you will be able to control your TV using the dedicated TV CONTROL on the remote if you have assigned it to the TV CTRL button.
4Repeat steps 2 through 3 to try a different code, or to enter a code for another component you want to control.
5When you’re done, press RECEIVER.
1While pressing the RECEIVER button, press and hold the 1 button.
The LED blinks.
Note
1• TV codes (for example, codes for TV, CATV, Satellite TV or DTV) can only be assigned to the TV/SAT or TV CTRL button.
• You can’t assign the AM / FM or RECEIVER buttons.
50
En
