04Controls and displays
Display
Illustration shows the VSX-817 model
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 11 12 |
| [ L ] | 6 |
| [ C ] |
|
SP | AB [ R ] |
|
| [Rs] | 0 |
| [SBR] |
|
[SBL] [Ls]
6
40 125 250 4K13K
13 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 |
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the current component:
AUTO
Lights when AUTO signal select is on.
SB (VSX-817 model only)
Depending on the source, this lights when a signal with surround back channel encoding is detected.
DIGITAL
Lights when a digital audio signal is detected.
DTS
Lights when a source with DTS encoded audio signals is detected.
2DIGITAL
Lights when a Dolby Digital encoded signal is detected.
ANALOG
Lights when an analog signal is detected.
42 PRO LOGIC IIx (VSX-817 model only)/
2 PRO LOGIC II
2PRO LOGIC IIx lights to indicate Pro Logic IIx decoding. 2 PRO LOGIC II lights to indicate Pro Logic II decoding (see Listening in surround sound on page 31 for more on this).
5 VIR.SB
Lights during Virtual surround back processing (page 35).
6 DIRECT
Lights when source Stream Direct playback is in use. Stream Direct playback bypasses the tone controls for the most accurate reproduction of a source.
7 AUTO SURR.
Lights when the Auto Surround feature is switched on (see Auto playback on page 31).
8 ATT
Lights when ANALOG ATT is used to attenuate (reduce) the level of the analog input signal.
9 SLEEP
2
Lights to indicate decoding of a DTS multichannel signal.
3 2 DIGITAL
Lights to indicate decoding of a Dolby Digital multichannel signal.
Lights when the receiver is in sleep mode.
10Tuner indicators
/ MONO
Lights when the mono mode is set using the MPX button.
24
En