Smooth Fitness 9.35HR user manual 826 843 845 846, Attach Adjustable Cylinder to Treadmill Frame

24

9.35HR TREADMILL

ASSEMBLY

STEP 7: ATTACH ADJUSTABLE CYLINDER TO TREADMILL FRAME

WARNING: THE PATENTED HYDRASUSPENSION SYSTEM REQUIRES THE ADJUSTABLE CYLINDER TO BE TIGHT FITTING. PLEASE BE PATIENT WITH THIS ASSEMBLY STEP.

(A)Put Adjustable Cylinder Cover-Upper (315) into Adjustable Cylinder (310).

(B)Attach the bottom of the Adjustable Cylinder (310) to the left Cylinder Mounting Shaft (509) and secure with 8x23x2mm washer (846) and one M8 Nylon Nut (826).

(C)Attach the head of the Adjustable Cylinder (310) to the left upright (301):

a:Align the through hole on the head of the Adjustable Cylinder (310) with the mounting hole on the frame (301).

b:As you slide the threaded shaft (845) through the aligned holes .

(D)Secure the cylinder head with two M8x15mm Allen Head Bolts (843).

(E)Repeat this procedure to assemble the Adjustable Cylinder on the right side of the frame.

826 X2

843X4

845X2

846X2