Smooth Fitness 9.25X user manual Cleaning, To apply lubricant to the walking belt

Page 26

26

SMOOTH 9.25X MOTORIZED TREADMILL

MAINTENANCE

CLEANING:

Routine cleaning of your treadmill will extend the product's life.

Warning: To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is unplugged from the wall electrical outlet before attempting any cleaning or maintenance.

Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight.

After each workout: Wipe off the console and other treadmill surfaces with a clean, water dampened soft cloth to remove excess perspiration.

Weekly: Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the belt and eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.

DECK LUBRICATION:

The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be checked periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be lubricated usually within the first year or 500 hours of use. Call your local Smooth dealer for service or questions regarding Smooth products.

Every 3 months of operation lift the sides of the walking belt and feel the top surface of the walking board as far as you can reach. If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, follow the instructions below.

Please use Lube 'N Walk (can be purchased from your dealer or call the number on the front of the manual), or a non- petroleum based silicone such as "Napa 8300" (available at most stores).

To apply lubricant to the walking belt:

1.Position the walking belt so that the seam is located on top and in center of the walking board.

2.Insert the spray nozzle into the spray head of the lubricant can.

3.While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board approximately 6" from the front of the treadmill. Apply the silicone spray to the walking board, moving from the front of the treadmill to the rear. Repeat this on the other side of the belt. Spray approximately 4 seconds on each side.

4.Allow the silicone to "set" for 1 minute before using the treadmill.

SPRAY FROM

FRONT TO BACK

Visit us at: www.smoothfitness.com

Image 26
Contents Smooth 9.25X Motorized Treadmill USER’S ManualPrecautions PrecautionsFor future service or related questions Power Requirements Power RequirementsPreassembly Hardware Comparison Chart Hardware chartParts List Description Qty Order NoParts List 151 152 Rubber Dot Parts Diagram 148 142 143 137 147 153 154 139 138 144 Assembly StepAssembly Assembly Assembly FIG3 FIG4 Assembly FIG5 137 Speaker Wires 155 Level Adjustment Level AdjustmentTransport Instructions Moving Your TreadmillMaintenance HOW to Maintain the Smooth 9.25HR TreadmillCleaning To apply lubricant to the walking beltWarranty Limited Home USE Warranty Smooth Fitness Treadmills WarrantyImportant Steps Before beginningAerobic exercise Target Heart RateFinding your pulse Muscle Chart Targeted muscle groupsToe Touch Stretching RoutineWarm up and cool down Shoulder LiftSide Stretch Hamstring StretchInner Thigh Stretch Calf-Achilles StretchComputer LED lights up but the running belt has no movement TroubleshootingTreadmill looses power during use Treadmill will not start888.800.1167
Related manuals
Manual 49 pages 16.36 Kb