Repair and Maintenance
qReplacing the Fuse
1 Make sure the power switch | 2 Under the front fender and | 3 Open the fuse cover to |
is turned OFF. | through the frame, locate the | expose the fuse. |
| fuse box attached to the top of |
|
| the battery. |
|
Amperage 
number
4 Remove the fuse and replace | 5 Close the fuse cover. |
with a new one of equal |
|
amperage. |
|
Note: Amperage rating is |
|
located on top of fuse. |
|
qReplacing the Chain
Tools required: 6mm Allen wrench, 10mm open wrench and Phillips screwdriver.
1 Remove the bolt and wash- | 2 Remove the bolt on the | 3 Remove the 3 screws from |
ers on the outside of the rear | inside of the rear wheel. | the top half of the chain guard |
wheel. | Remove nut and pull bolt out | and remove. |
| of axle. |
|
4 Remove the 2 screws from | 5 Spread the chain tensioner | 6 Remove chain from both |
the bottom half of the chain | apart to loosen chain. | sprockets and replace with new |
guard and remove. |
| chain. |
|
| 5 |
WARNING:
To prevent shock, please follow the instructions accordingly and do not skip or combine any steps.
WARNING:
Do not touch motor after use. Motor is (or can be) very hot.