Before You Begin
Remove contents from box. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping. Because the scooter was 95 percent assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 20 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 3 for charging information.
|
|
| Brake Lever | |
| Speed Control |
|
| |
|
|
| Brake Lever | |
|
|
| Adjuster | |
|
| Handlebar height adjust | ||
|
|
| ||
Charger |
|
| Extension Tube | |
|
|
| ||
| Charger |
|
| |
| Port |
|
| |
Charger | Folding System |
| ||
Plug | Locking Knob | |||
|
| |||
| On/off switch | Headset | ||
|
| |||
| and charging port |
| ||
|
|
| Front Fork | |
| Battery pack |
| Tire | |
| and motor | Wheel | ||
| controller |
| ||
Required Tools
Some tools may be supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied tools only as a last resort.
6mm hexagonal | Inflation valve | |
key wrench | adapter/extender | for Schrader valve |
(included) | (with E200 & E300 | tires, with pressure |
| only) | gauge |
WARNING: DO NOT USE NON- RAZOR PRODUCTS WITH YOUR RAZOR ELECTRIC SCOOTER. The scooter has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may or may not be compatible.
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call
2