Getting Started
If you are using this product for the first time, follow these steps to install the batteries, turn the product on and adjust the screen contrast.
1.Turn the product over.
2.Use a small Phillips screwdriver to remove the screw to the battery cover and then remove the cover.
3.Place four AAA batteries inside the case, fol- lowing the diagram.
4.Replace the battery cover.
5.Press ON/OFF.
A brief demonstration appears.
6.Press CLEAR to stop the demo. The Ready screen appears.
7.Press 
or 
repeatedly to adjust the screen contrast.
You can adjust the contrast only at the Ready screen.
√Disabling the Demonstration
You probably do not want to view the demon- stration every time you turn on this product. To disable the demonstration, type
4