Alliance Laundry Systems FLW1526C manual Remove the Shock Sleeves and Shipping Brace

Page 15

Step 6: Remove the Shock Sleeves and Shipping Brace

Remove front access panel by removing the two screws at the bottom of the panel.

Remove the five bolts and lockwashers from shipping brace with 9/16 in. wrench and remove brace. Refer to Figure 10. One is holding the brace to the weight.

Remove this bolt first. Four bolts are located on the washer base. Remove the two front bolts next and then the two rear bolts. Remove all four shock sleeves by pulling on the yellow rope. Remove label from front side of front access panel or shipping brace and place on backside of front access panel for future reference.

NOTE: The shipping brace, bolts, washers and shock sleeves should be saved and MUST be reinstalled whenever the washer is moved more than 4 feet (1.22 m). Refer to User-Maintenancesection for instructions. Do not lift or transport washer from front or without shipping materials installed.

Store the shipping materials in the accessories bag. Save materials for use whenever the washer is moved.

Reinstall front access panel.

IMPORTANT: DO NOT tip washer more than

6 inches (152.4 mm) in any direction after shipping brace has been removed. Shock absorbers may separate and damage to washer may result. For leveling purposes, the washer may be tilted a maximum of 6 inches (152.4 mm) in any direction.

 

 

Installation

1

 

 

 

 

2

 

 

3

 

4

FLW2124N

 

 

 

 

FLW2124N

1

Shock Sleeves

 

2

Motor Mount

 

3

Hooked End of Shipping Brace

4

Bolts and Lockwashers

 

Figure 10

Step 7: Wipe Out Inside of Wash Drum

Before using washer for the first time, use an all-purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside wash drum.

FLW2126N

Figure 11

802734

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Frontload Washers Page 802734 Contents Back Cover Safety Information Explanation of Safety MessagesImportant Safety Instructions Safety Information Dimensions and Specifications InstallationTools Before You StartInstalling the Washer Position Washer Near Installation AreaPosition and Level the Washer Water Supply Connect Fill HosesImportant do not cross thread or overtighten couplings Connecting HosesRisers FLW1980N Standpipe InstallationWipe Out Inside of Wash Drum Remove the Shock Sleeves and Shipping BraceElectrical Requirements Plug In the WasherGrounding Instructions Check InstallationVending Meter CaseSlide Extension Models Prepped for Card Reader Installing Extension Onto Coin Slide OptionClose Loading Door OperationOperation Instructions for Coin Slide Operated Washers Load LaundryInsert Money Set WASH/RINSE TemperaturesAdd Laundry Supplies Set Fabric SelectorRapid Advance Indicator LightsOperation Instructions for MDC Washers Set Fabric Selector and Wash Temperature To Insert Card Insert Coins or CardTo Insert Money Start WasherSpin Operation Instructions for NetMaster Washers Set Wash Temperature Insert COIN/CARD User-Maintenance Instructions MaintenanceCleaning Foreign Object Trap Reinstallation of Shipping MaterialsWasher Symptom Possible Cause/Solution TroubleshootingTroubleshooting Contact Information Page Installer Checklist Fast Track for Installing the WasherRefer to the manual for more detailed information
Related manuals
Manual 26 pages 4.82 Kb

FLW1526C specifications

The Alliance Laundry Systems FLW1526C is a cutting-edge commercial washer designed specifically for durability and efficiency in laundry environments. This front-loading washer is part of Alliance’s range of high-capacity models, making it an ideal choice for laundromats, hotels, and other businesses that require reliable and consistent washing solutions.

One of the standout features of the FLW1526C is its impressive capacity. With a 26-pound load capacity, this washer can handle sizable laundry tasks, reducing the number of cycles needed and increasing productivity. Efficiency is further enhanced by the washer's advanced water extraction capabilities, which help minimize drying times and energy consumption.

The FLW1526C utilizes innovative technology to optimize performance. It is equipped with an intuitive microprocessor control system that simplifies operation and allows for customizable wash cycles. Users can select from a variety of preset cycles tailored to different fabric types and cleaning needs, ensuring that garments receive the best treatment possible while maintaining their integrity.

Durability is a hallmark of Alliance Laundry Systems design, and the FLW1526C reflects this commitment. Constructed with a robust stainless steel wash basket, it can withstand the rigors of frequent use without compromising performance. Additionally, the heavy-duty cabinet is designed to resist wear and tear, ensuring a long lifespan for the machine.

Another significant feature of the FLW1526C is its eco-friendly design. It operates with water-saving technologies that help reduce overall consumption without sacrificing wash quality. This not only leads to cost savings over time but also supports sustainable business practices.

The machine's user-friendly interface is designed for simplicity, making it accessible for operators of all skill levels. The large door provides easy loading and unloading access, and the modern aesthetic of the machine complements any laundry facility environment.

Overall, the Alliance Laundry Systems FLW1526C combines high capacity, advanced technology, and robust construction to meet the demands of commercial laundry operations. Its efficiency, flexibility, and user-friendly design make it a valuable investment for businesses looking to enhance their laundry capabilities.
Top Page Image Contents