Models Prepped for Card Reader

Installing Extension Onto Coin Slide: Option 1

1.Install slide extension onto top of coin slide using two remaining screws and lockwashers. Refer to Figure 15.

Attaching

Screws

Lockwashers

Coin Slide

Slide

Extension

TLW1564K

Figure 15

2.Insert coins and partially extend coin slide.

3.Insert coin slide on its side through meter case opening. Then rotate 90 degrees to its proper orientation.

4.Return coin slide and hook slide pins onto meter case.

5.Continue coin slide installation according to manufacturer’s instructions.

NOTE: During coin slide installation, make sure activation lever is up and off the switch. Refer to Figure 16.

TLW2090N

1Lever Off Switch

Figure 16

Installation

6.Check to make sure coin slide is operating properly by inserting coins and starting a cycle. The IN USE light will turn on, or flash if it is already on, to indicate proper operation.

Installing Extension Onto Coin Slide: Option 2

1.Install coin slide according to manufacturer’s instructions.

2.Insert coins into coin slide and slowly push slide in. Stop before coins fall into coin box. This will allow installing extension through meter case service door opening.

3.Install slide extension onto top of coin slide using two screws and lockwashers. Refer to Figure 15.

NOTE: Make sure extension lever is above switch activation lever.

4.Check to make sure coin slide is operating properly by inserting coins and starting a cycle. The IN USE light will turn on, or flash if it is already on, to indicate proper operation.

The machine is shipped from the factory with the Electronic Control Diagnostic Harness Assembly unplugged. To avoid unauthorized manual programming or vending, perform the following steps.

1.Open control panel. Refer to Figure 17.

2.Locate diagnostic harness on electronic control.

3.Plug connectors for “white/black” wire and “red/ blue” wire together.

	1
	FLW6R
1	Control Panel

Figure 17

802734

FLW1526C specifications

The Alliance Laundry Systems FLW1526C is a cutting-edge commercial washer designed specifically for durability and efficiency in laundry environments. This front-loading washer is part of Alliance’s range of high-capacity models, making it an ideal choice for laundromats, hotels, and other businesses that require reliable and consistent washing solutions.

One of the standout features of the FLW1526C is its impressive capacity. With a 26-pound load capacity, this washer can handle sizable laundry tasks, reducing the number of cycles needed and increasing productivity. Efficiency is further enhanced by the washer's advanced water extraction capabilities, which help minimize drying times and energy consumption.

The FLW1526C utilizes innovative technology to optimize performance. It is equipped with an intuitive microprocessor control system that simplifies operation and allows for customizable wash cycles. Users can select from a variety of preset cycles tailored to different fabric types and cleaning needs, ensuring that garments receive the best treatment possible while maintaining their integrity.

Durability is a hallmark of Alliance Laundry Systems design, and the FLW1526C reflects this commitment. Constructed with a robust stainless steel wash basket, it can withstand the rigors of frequent use without compromising performance. Additionally, the heavy-duty cabinet is designed to resist wear and tear, ensuring a long lifespan for the machine.

Another significant feature of the FLW1526C is its eco-friendly design. It operates with water-saving technologies that help reduce overall consumption without sacrificing wash quality. This not only leads to cost savings over time but also supports sustainable business practices.

The machine's user-friendly interface is designed for simplicity, making it accessible for operators of all skill levels. The large door provides easy loading and unloading access, and the modern aesthetic of the machine complements any laundry facility environment.

Overall, the Alliance Laundry Systems FLW1526C combines high capacity, advanced technology, and robust construction to meet the demands of commercial laundry operations. Its efficiency, flexibility, and user-friendly design make it a valuable investment for businesses looking to enhance their laundry capabilities.