Alliance Laundry Systems Comprehensive Troubleshooting Guide for Speaker System
Page 16

Installation

Step 8: Plug In the Washer

Electrical Requirements

(120 Volt, 60 Hertz with 3-Prong Grounding Plug)

NOTE: The wiring diagram is located in the control hood.

WARNING

To reduce the risk of fire, electric shock, serious injury or death, all wiring and grounding MUST conform with the latest edition of the National Electrical Code, ANSI/NFPA No. 70, and such local regulations as might apply. It is the customer’s responsibility to have the wiring, fuses and circuit breakers installed by a qualified electrician to make sure adequate electrical power is available to the washer.

W518

When plugging in the washer:

∙DO NOT overload circuits.

∙DO NOT use an extension cord.

∙DO NOT use an adapter.

∙DO NOT operate other appliances on the same circuit. Use separately fused 15 Amp circuits.

The washer is designed to be operated on a separate branch, polarized, three-wire, effectively grounded, 120 Volt, 60 Hertz, AC (alternating current), circuit protected by a 15 ampere fuse, equivalent fusetron or circuit breaker.

The three-prong grounding plug on the power cord should be plugged directly into a polarized three-slot effectively grounded receptacle rated 110/120 Volts AC (alternating current) 15 Amps. Refer to Figure 12 to determine correct polarity of the wall receptacle.

2

 

 

1

3

 

120±12

0 V.A.C.

 

V.A.C.

 

 

 

120±12

 

5

V.A.C.

4

Standard 120 Volt, 60 Hertz

3-Wire Effectively

Grounded Circuit

DRY2022N

1L1

2Ground

3Neutral Side

4Round Grounding Prong

5Neutral

Figure 12

WARNING

To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electric power source.

W082

14

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

802734

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Frontload Washers Page 802734 Contents Back Cover Explanation of Safety Messages Safety InformationImportant Safety Instructions Safety Information Installation Dimensions and SpecificationsBefore You Start ToolsPosition Washer Near Installation Area Installing the WasherPosition and Level the Washer Connect Fill Hoses Water SupplyConnecting Hoses Important do not cross thread or overtighten couplingsRisers Standpipe Installation FLW1980NRemove the Shock Sleeves and Shipping Brace Wipe Out Inside of Wash DrumPlug In the Washer Electrical RequirementsCheck Installation Grounding InstructionsMeter Case VendingSlide Extension Installing Extension Onto Coin Slide Option Models Prepped for Card ReaderOperation Operation Instructions for Coin Slide Operated WashersLoad Laundry Close Loading DoorSet WASH/RINSE Temperatures Add Laundry SuppliesSet Fabric Selector Insert MoneyIndicator Lights Rapid AdvanceOperation Instructions for MDC Washers Set Fabric Selector and Wash Temperature Insert Coins or Card To Insert MoneyStart Washer To Insert CardSpin Operation Instructions for NetMaster Washers Set Wash Temperature Insert COIN/CARD Maintenance User-Maintenance InstructionsReinstallation of Shipping Materials Cleaning Foreign Object TrapTroubleshooting Washer Symptom Possible Cause/SolutionTroubleshooting Contact Information Page Fast Track for Installing the Washer Installer ChecklistRefer to the manual for more detailed information
Related manuals
Manual 26 pages 4.82 Kb

FLW1526C specifications

The Alliance Laundry Systems FLW1526C is a cutting-edge commercial washer designed specifically for durability and efficiency in laundry environments. This front-loading washer is part of Alliance’s range of high-capacity models, making it an ideal choice for laundromats, hotels, and other businesses that require reliable and consistent washing solutions.

One of the standout features of the FLW1526C is its impressive capacity. With a 26-pound load capacity, this washer can handle sizable laundry tasks, reducing the number of cycles needed and increasing productivity. Efficiency is further enhanced by the washer's advanced water extraction capabilities, which help minimize drying times and energy consumption.

The FLW1526C utilizes innovative technology to optimize performance. It is equipped with an intuitive microprocessor control system that simplifies operation and allows for customizable wash cycles. Users can select from a variety of preset cycles tailored to different fabric types and cleaning needs, ensuring that garments receive the best treatment possible while maintaining their integrity.

Durability is a hallmark of Alliance Laundry Systems design, and the FLW1526C reflects this commitment. Constructed with a robust stainless steel wash basket, it can withstand the rigors of frequent use without compromising performance. Additionally, the heavy-duty cabinet is designed to resist wear and tear, ensuring a long lifespan for the machine.

Another significant feature of the FLW1526C is its eco-friendly design. It operates with water-saving technologies that help reduce overall consumption without sacrificing wash quality. This not only leads to cost savings over time but also supports sustainable business practices.

The machine's user-friendly interface is designed for simplicity, making it accessible for operators of all skill levels. The large door provides easy loading and unloading access, and the modern aesthetic of the machine complements any laundry facility environment.

Overall, the Alliance Laundry Systems FLW1526C combines high capacity, advanced technology, and robust construction to meet the demands of commercial laundry operations. Its efficiency, flexibility, and user-friendly design make it a valuable investment for businesses looking to enhance their laundry capabilities.
Top Page Image Contents