Inserting the Batteries, To Ensure Proper Function

INSERTING THE BATTERIES

To insert the batteries, remove the battery compartment		A
cover at the back of	the game. (To remove cover, push
in direction of the arrow.)

Insert two ÒAAÓ/LR6 batteries (not included), making		T
sure to align+Ó Ò and Ò-Ó	as shown.
TO ENSURE PROPER	FUNCTION:

- Do not mix old and new batteries.		T
- Do not mix alkaline, standard or
rechargeable batteries.
- Battery installation should be done by an adult.
- Non-rechargeable batteries are not to be recharged.		E
- Rechargeable batteries are to be removed from the toy before being charged
(if removable).

- Rechargeable batteries are only to be charged under adult supervision (if removable). - Only batteries of the same or equivalent type as

recommended are to be used.		R
- Batteries are to be inserted with the correct polarity.		I
- Exhausted batteries are to be removed from the toy.
- The supply terminals are not to be short-circuited.
		E
RESET BUTTON:
After battery insertion, the RESET switch may be
pushed only if the game doesnÕt work properly. (Use a		S
ball-point pen.) The display should appear as shown	in
the diagram at the right.