Warning: This product is designed to work with line level outputs or headphone outputs only. DO NOT connect it directly to speaker outputs as it will permanently damage the transmitter.
Powering the Speakers
There are two options to power your wireless speakers: using the included AC power adapters or using 8
AC Power Adapters
Speaker
AC Power adapter
120 V AC
Wall Outlet
1.Turn the speaker volume down by rotating the Power/Volume/Scan control on the front of the speaker all the way to the left.
2.Insert the small, round plug from the speaker AC power adapter into the speaker power input jack.
3.Plug the other end of the speaker AC power adapter into any standard 120V AC wall outlet.
Note: Be sure to use the speaker AC power adapter rated 18V DC 700 mA.
Warning: This product is not water resistant. To avoid electrical shock, it should not be used near water sources if powered with the AC adapter. Never submerge in water.
C-cell Batteries
1.Turn the speaker volume down by rotating the Power/Volume/Scan control on the front of the speaker all the way to the left.
2.Remove the battery compartment cover on the back of the speaker.
3.Insert eight (8)
4.Replace the battery compartment cover on the back of the speaker.
Important: If you are using rechargeable batteries NiMH or NiCd, the batteries will charge when the speaker is powered with the AC power adapter. DO NOT power the speaker with the AC power adapter if you installed alkaline or other
DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkaline battery). DO NOT mix new and used batteries. DO NOT leave batteries installed in the product when not in use for long periods. Always remove old, weak or