HELPFUL HINTS
For the best performance, follow these guidelines:
1.Keep background noise low - for best results play with FUNKY FURBY in a quiet room.
2.FUNKY FURBY performs best when you sit between 12 and 18 inches away from it, facing it directly.
3.Wait until FUNKY FURBY has finished speaking and moving before giving a command.
4.Talk in a normal tone of voice, the way that you would talk to a friend. Pronounce all the syllables of each word clearly.
5.Shouting does not improve voice recognition.
6.Keep the command card handy, and remember that FUNKY FURBY will respond only to the exact commands on the card.
7.FUNKY FURBY is a
8.Use only 4 x 1.5V “AA” or LR6 size ALKALINE batteries with FUNKY FURBY.
9.If FUNKY FURBY begins acting erratically, please change the batteries with all new alkaline batteries.
IMPORTANT NOTE: If FUNKY FURBY begins to function improperly, switch the ON/OFF switch to the “OFF” position, and then move back to the “ON” position.
CLEANING INSTRUCTIONS
To clean FUNKY FURBY, gently brush the hair with a cloth or soft brush to loosen any dirt. Then use a slightly damp cloth to remove stains.
•DO NOT PUT IN THE WASHING MACHINE
•DO NOT SUBMERGE IN WATER
•DO NOT GET WET EXCEPT A DAMP CLOTH ON THE FUR
•TO PREVENT STAINING THE FUR, WIPE DIRT OFF IMMEDIATELY
•IF FUNKY FURBY GETS WET, REMOVE THE BATTERIES AND DRY THE FUR
•ONCE COMPLETELY DRY, REPLACE THE BATTERIES
•DO NOT USE DETERGENT OR STAIN REMOVERS ON THE FUR
High temperature will destroy the unit.
Do not leave unit in direct sunlight.
•Prevent spills of food and beverage on the unit.
•Do not throw or kick the product, and do not push sharp objects through the speaker openings.
To Replace Batteries
Using a Phillips/cross head screwdriver, loosen screw in battery compartment cover (screw stays attached to cover) on the bottom. Insert 4 X 1.5V “AA” or LR6 size alkaline batteries. Replace cover and tighten screw.
IMPORTANT:
BATTERY INFORMATION
Please retain this information for future reference.
Batteries should be replaced by an adult.
CAUTION:
1.Always follow the instructions carefully. Use only batteries specified and be sure to insert item correctly by matching the + and – polarity markings.
2.Do not mix old and new batteries or standard
3.Remove exhausted or dead batteries from the product.
4.Remove batteries if product is not to be played with for a long time.
5.Do not
6.Should this product cause, or be affected by, local electrical interference, move it away from other electrical equipment. Reset (switching off and back on again or removing and
7.RECHARGEABLE BATTERIES: Do not mix these with any other types of batteries. Always remove from the product before recharging. Recharge batteries under adult supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.
9 | 10 |