Toshiba M30-35 manual Main Battery, Error code Meaning

2 Troubleshooting Procedures			2.3 Power Supply Troubleshooting
Check 1 Compare the patterns in the hexadecimal error code to the tables below.
DC IN
	Error code		Meaning
	10h	AC Adaptor output voltage is over 16.5 V.
	11h	Advanced Port Replicator output voltage is over 16.5 V.
	12h	Current from the DC power supply is over the limit (7.00 A).
	13h	Current from the DC power supply is over the limit (0.5 A), when there
		is no load.
	14h	Current sensing IC is not normal, when there is no load.
Main Battery
	Error code		Meaning
	20h	Over voltage has been detected.
	21h	Main battery charge current is over 7.00 A.
	22h	Main battery discharge current is over 0.5 A, when there is no load.
	23h	Main battery charge current is over 4.3 A, when the AC adapter is not
		directly connected.
	24h	Current sensing IC is not normal, when there is no load.
	25h	Main battery charge current is over 0.3 A.
S3V output
	Error code		Meaning
	40h	S3V voltage is 3.14 V or under, when the computer is powered on/off.
	45h	S3V voltage is 3.14 V or under at power on.
1R5-C1V output
	Error code		Meaning
	50h	1R5-C1V voltage is over 1.80 V, when the computer is powered on/off.
	51h	1R5-C1V voltage is 1.275V or under, when the computer is powered
		on.
	52h	1R5-C1V voltage is 1.275V or under, when the computer is booting up.
	53h	1R5-C1V voltage is 1.275V or under, when the computer is
		suspended.
	54h	1R5-C1V voltage is not normal, when the computer is suspended.
	55h	1R5-C1V voltage is 1.275V or under at power on.

2-10 Satellite M30-35 Maintenance Manual (960-455)