4 Replacement Procedure 4.29 Fluorescent Lamp
Assembly of outside Tape and Cover shield
1. Assembly of Tape shield and Tape Adhesive used for Top case fixing
NOTE: Pressure or stress should not be given on Top case during this process.
2. Assembly of Cover shield (S)
NOTE: Pressure or stress should not be given on control PCB.
Usage of gloves with anti-electric discharge coating is recommended to eliminate
possible damage on circuits occurred by ESC.
3. Assembly of Cover shield (G)
NOTE: Pressure or stress should not be given on Gate COF.
4. Assembly of Tape adhesive used for B/L Wire fixing
NOTE: Pressure or stress should not be given on B/L wire.
Figure 4-69 Replacing LG.Philips fluorescent lamp (WXGA) (8)
4-96 Satellite M30-35 Maintenance Manual (960-455)