Toshiba M30-35 manual Replacement Procedures CD-Key assembly, Removing the CD-Key assembly

4 Replacement Procedures 4.17 CD-Key assembly

4.17 CD-Key assembly

Removing the CD-Key assembly

To remove the CD-key assembly, follow the steps below and refer to figures 4-25.

1.Disconnect the CD-key flexible cable from the connector PJ7000 on the system board.

2.Remove the following screw and the CD-key assembly.

• M2⋅4B BIND screw ⋅1

CD-key flexible cable

M2⋅4B BIND

CD-key

Figure 4-25 Removing the CD-key assembly

Installing the CD-Key assembly

To install the CD-key assembly, follow the steps below and refer to figures 4-25.

1.	Place the CD-key assembly and secure it with the following screw.
	• M2⋅4B	BIND screw	⋅1
2.	Connect the CD-key flexible cable to the connector PJ7000 on the system board.

4-46 Satellite M30-35 Maintenance Manual (960-455)