![](/images/new-backgrounds/1119942/119942385x1.webp)
4 Replacement Procedures | 4.6 Optical Drive |
4.6Optical Drive
Removing the Optical Drive
To remove the optical drive, follow the steps below and refer to figures
CAUTION: Do not apply excessive force to the top of an optical drive.
1. Remove the following screws securing the optical drive.
• M2.5⋅4B FLAT HEAD screw | ⋅2 |
2.Slide the optical drive outward to disconnect it from the connector PJ1820 on the system board.
M2.5⋅4B FLAT HEAD
Optical drive
Figure 4-6 Removing the optical drive
Satellite |