Toshiba M30-35 Wireless LAN board Replacement Procedures, Removing the wireless LAN board

4.8 Wireless LAN board 4 Replacement Procedures

4.8Wireless LAN board

CAUTION: The power must be turned off when you remove the wireless LAN board. Removing the wireless LAN board with the power on risks damaging the card or the computer itself.

Never press hard or bend the wireless LAN board.

Removing the wireless LAN board

To remove the wireless LAN board, follow the steps below and refer to figure 4-10.

1.Turn the computer upside down.

2.Loosen the screw fixing the wireless LAN board cover.

•	M2⋅4B	BIND screw	⋅1
		Or
•	M2⋅4	LH STICK screw	⋅1

3.Peel off the glass tape and disconnect the two wireless LAN antenna cables (black and white) from the wireless LAN board.

4.Open the left and right latches holding the wireless LAN board and remove it.

Wireless LAN board cover

M2⋅4B BIND or M2⋅4 LH STICK

Antenna cable (black)

Glass tape

Wireless LAN board

Antenna cable (white)

Figure 4-10 Removing the wireless LAN board

Satellite M30-35 Maintenance Manual (960-455) 4-23