Connections

Connecting Cables

Connect the power cord for your monitor to the POWER port on the back of the monitor.

Plug the power cord for the monitor into a nearby outlet.

Use a connection appropriate for your computer.

Using the D-sub (Analog) connector on the video card.

•Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

[RGB IN]

Using the DVI (Digital) connector on the video card.

•Connect the DVI Cable to the DVI IN(HDCP) Port on the back of your Monitor.

[DVI IN(HDCP)]

Connected to a Macintosh.

•Connect the monitor to the Macintosh computer using the D-sub con- nection cable.

Note

If the monitor and the computer are connected, you can turn them on and use them.