Introduction
Note
If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable.
AUTO button
Use this button for auto adjustment.
Power button [ 
]
Use this button for turning the product on and off.
Power Indicator
This light is lit when operating normally, and blinks once when your adjustments are saved.
Note
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods.
Rear
Note
The configuration at the back of the product may vary from product to product.
POWER S/W / POWER
POWER S/W
Switch the product on and off.
POWER
Connect the power cord for your monitor to the POWER port on the back of the product.