TP-Link manual TL-WA730RE 150Mbps Wireless N Range Extender User Guide

TL-WA730RE150Mbps Wireless N Range Extender User Guide

RESET: The Reset button is used to restore the AP’s factory default settings. There are two ways to reset the Access Point’s factory defaults:

zMethod one: With the AP powered on, use a pin to press and hold the Reset button (about 5 seconds) until the System LED becomes quick-flash from slow-flash. And then release the button and wait the AP to reboot to its factory default settings.

zMethod two: Restore the default settings from “System Tools > Factory Defaults” of the AP's Web-based management page.

Wireless antenna: The external antenna is used to transmit and receive wireless data.

)Note:

Ensure the Range Extender is powered on before it restarts completely.

5