150Mbps Wireless N Range Extender User Guide
Appendix C: Troubleshooting
T1. How do I restore my Access Point’s configuration to its factory default settings?
With the Access Point powered on, use a pin to press and hold the RESET button on the rear panel for more than 8 seconds before releasing it.
)Note:
Once the Access Point is reset, the current configuration settings will be lost and you will need to reconfigure the Access Point.
T2. What can I do if I forget my password?
1)Restore the Access Point’s configuration to its factory default settings. If you don’t know how to do that, please refer to previous section T1;
2)Use the default user name and password: admin, admin;
3)Try to reconfigure your AP by following the instructions of this UG.
T3. What can I do if I cannot access the
Assign a static IP address 192.168.0.100 for your computer first before logging in the management page. Here takes the procedures in Windows 7 for example.
1)Go to Start > Settings > Control Panel, and then Click View network status and tasks.
54
