TP-Link manual Time Settings, TL-WA730RE 150Mbps Wireless N Range Extender User Guide

TL-WA730RE150Mbps Wireless N Range Extender User Guide

¾SNMP Agent - Select the radio button before Enable will enable this function if you want to have remote control through SNMPv1/v2 agent with MIB-II. Select the radio button before Disable will disable this function. The default setting is Disable.

¾SysContact - The textual identification of the contact person for this managed node.

¾SysName - An administratively-assigned name for this managed node.

¾SysLocation - The physical location of this node.

)Note:

Specifying one of these values via the Device's Web-Based Utility makes the corresponding object read-only. If there isn't such a config setting, then the write request will succeed (assuming suitable access control settings), but the new value would be forgotten the next time the agent was restarted.

¾Get Community - Enter the community name that allows Read-Only access to the Device's SNMP information. The community name can be considered a group password. The default setting is “public”.

¾Get Source - Get source defines the IP address or subnet for management systems that can read information from this 'get' community device.

¾Set Community - Enter the community name that allows Read/Write access to the Device's SNMP information. The community name can be considered a group password. The default setting is “private”.

¾Set Source - Set source defines the IP address or subnet for management systems that can control this 'set' community device.

)Note:

A restricted source can be a specific IP address (e.g. 10.10.10.1), or a subnet - represented as IP/BITS (e.g. 10.10.10.0/24). If an IP Address of 0.0.0.0 is specified, the agent will accept all requests under the corresponding community name.

Click the Save button to save your settings.

4.9.2 Time Settings

Choose menu System Tools > Time Settings, and then you can configure the time on the following screen.

39