Factory Defaults, Backup & Restore | TP-Link TL-WA730RE specification

To upgrade the device's firmware, follow these instructions:

TL-WA730RE150Mbps Wireless N Range Extender User Guide

)Note:

1.There is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing problems caused by the device itself, you can try to upgrade the firmware.

2.Before upgrading the device’s firmware, you should write down some of your customized settings to avoid losing important configuration settings of device.

To upgrade the device's firmware, follow these instructions:

1.Download a more recent firmware upgrade file from the TP-LINK website (http://www.tp-link.com).

2.Enter the path name or click Browse… to select the downloaded file on the computer into the File blank.

3.Click Upgrade.

)Note:

Do not turn off the device or press the Reset button while the firmware is being upgraded. The device will reboot after the Upgrading has been finished.

4.9.6 Factory Defaults

Selecting System Tools > Factory Default allows you to restore the factory default settings for the device on the screen shown in Figure 4-32.

Figure 4-32 Restore Factory Defaults

Click Restore to reset all configuration settings to their default values.

•Default User Name: admin

•Default Password: admin

•Default IP Address: 192.168.0.254

•Default Subnet Mask: 255.255.255.0

)Note:

Any settings you have saved will be lost when the default settings are restored.

4.9.7 Backup & Restore

Selecting System Tools > Backup & Restore allows you to save all configuration settings to your local computer as a file or restore the device's configuration on the screen shown in Figure 4-33.

44

Image 52

TP-Link manual Factory Defaults, Backup & Restore, TL-WA730RE 150Mbps Wireless N Range Extender User Guide

Contents

TL-WA730RE 150Mbps Wireless N Range Extender Rev 2.0.0 COPYRIGHT & TRADEMARKS All rights reserved FCC RF Radiation Exposure Statement FCC STATEMENTCE Mark Warning Safety Information Canadian Compliance StatementIndustry Canada Statement Korea Warning Statements This product can be used in the following countries DECLARATION OF CONFORMITY Product Description 150Mbps Wireless N Range ExtenderThe product carries the CE Mark ETSI EN 300 328 V1.7.1 CONTENTS Package ContentsHardware Installation Chapter 3 Quick Installation Guide Appendix B Factory Defaults Appendix C TroubleshootingAppendix D Specifications Appendix A Application Example Package Contents TL-WA730RE Chapter 1 Introduction 1.1 Product Overview1.2 Conventions TL-WA730RE 150Mbps Wireless N Range Extender User Guide 1.3 Main Features Features1.4 Appearance Benefits 1.4.2 The Rear Panel Ensure the Range Extender is powered on before it restarts completely Chapter 2 Hardware Installation 2.3 Connecting the Device2.1 Before You Begin 2.2 Basic Requirements 1. Connect the Cable or DSL modem to a Router Chapter 3 Quick Installation Guide 3.1 Quick Setup Figure 3-2 Login Windows Figure 3-4 Operation Mode Figure 3-6 AP List Figure 3-7 Wireless Settings - Access Point mode Figure 3-9 Quick Setup - Finish Figure 3-11 Quick Setup - Finish Chapter 4 Configure the Device 4.1 Login 4.2 Status 4.4 Operation Mode 4.3 Quick Setup4.5 WPS I. By PBC To add a new deviceMethod One TL-WA730RE 150Mbps Wireless N Range Extender User Guide TL-WA730RE 150Mbps Wireless N Range Extender User Guide TL-WA730RE 150Mbps Wireless N Range Extender User Guide 4.7 Wireless 4.6 Network 4.7.1 Wireless Settings ¾ Region - Please select the right region from the drop-down list 4.7.2 Wireless Security 1 Repeater Range Extender 3 WPA2-Personal - WPA version WEP Key Format - You can select ASCII or Hexadecimal format. ASCII format stands for any combination of keyboard characters in the specified length. Hexadecimal format stands for any combination of hexadecimal digits 0-9, a-f, A-F in the specified length 2 Access Point 4.7.3 Wireless MAC Filtering To set up an entry, follow these instructions To add a MAC Address Filtering entry, follow these instructions To modify or delete an existing entry 4.7.4 Wireless Advanced 150Mbps Wireless N Range Extender User Guide 4.7.5 Antenna Alignment 4.7.6 Throughput Monitor 4.7.7 Wireless Statistics 4.8 DHCP 4.8.1 DHCP Settings 4.8.2 DHCP Clients List 4.8.3 Address Reservation 4.9 System Tools To Reserve IP addressesTo modify A Reserved IP address To delete all Reserved IP addresses 1. Click Clear All 4.9.1 SNMP 4.9.2 Time Settings ¾ To set time manually 4.9.3 Diagnostic¾ For automatic time synchronization Figure 4-28 Diagnostic 4.9.4 Ping Watch Dog 4.9.5 Firmware Upgrade 4.9.7 Backup & Restore 4.9.6 Factory DefaultsTo upgrade the devices firmware, follow these instructions 4.9.8 Reboot To restore the devices configuration, follow these instructions 4.9.9 Password 4.9.10 System Log Figure 4-36 System Log 4.9.11 Statistics ¾ Statistics Table ¾ Total¾ Current ¾ Modify Appendix A Application Example 3 Right-click the wireless connection icon “” on the screen of the PC and then select View Available Wireless Networks TL-WA730RE 150Mbps Wireless N Range Extender User Guide Appendix B Factory Defaults Default ValueCommon Default Settings Wireless Appendix C Troubleshooting T2. What can I do if I forget my password? 2 Click Change adapter settings 3 Right-click Local Area Connection, and Click Properties 4 Double-click Internet Protocol Version 4 TCP/IPv4 TL-WA730RE 150Mbps Wireless N Range Extender User Guide General Appendix D SpecificationsPhysical and Environment Appendix E Glossary TL-WA730RE 150Mbps Wireless N Range Extender User Guide