Toshiba M30-35 manual Tests and Diagnostics Log Utilities, 00 00 0000 FDD-WRITE Protected

3 Tests and Diagnostics 3.20 Log Utilities

3.20.2 Operations

1.Selecting 5 and pressing Enter in the DIAGNOSTIC MENU, logs error information into RAM or onto a floppy disk. The error information is displayed in the following format:

XXXXX ERRORS				PASS STS			ADDR	WD RD HSTS [ERROR STATUS NAME]
CNT		TS-NO
001		FDD 02		0000 103			00001	00 00 0000 FDD-WRITE PROTECTED
001		FDD 01		0000 180			00001	00 00 0000 FDD-TIME OUT ERROR
						Address
					Error status					HDC status
					Pass count
									Read data
			Subtest number						Write data		Error status name
		Test name
	Error count

[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]

2.The error information displayed on the screen can be manipulated by the following number keys:

The 1 key scrolls the display to the next page. The 2 key scrolls the display to the previous page. The 3 key returns to the Diagnostic Menu.

The 4 key erases all error log information in RAM. The 5 key outputs the error log information to a printer. The 6 key reads the log information from a floppy disk. The 7 key writes the log information to a floppy disk.

3.In the case of “error retry OK,” a capital “R” will be placed at the beginning of the error status. However, it is not added to the error count.

3-40 Satellite M30-35 Maintenance Manual (960-455)