0304NSMCREJSC | JVC SP-DWF10 manual

Additional Information

Speaker layout

To obtain the best possible sound from your unit:

—Place a subwoofer wherever you like since bass sound is non- directional. Normally place it in front of you.

—Place all the main speakers at the same distance from the listening position.

< Only for SP-DWF10 >

—Be sure to place the powered subwoofer to the TV's right. If you place the powered subwoofer to the TV's left, keep sufficient distance between them to prevent the TV from appearing mottled.

		Subwoofer
Left front	Center	Right front
speaker	Center	speaker
speaker	speaker	speaker
	speaker
	Listening position
Left surround		Right surround
speaker		speaker

Troubleshooting

Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your dealer.

Power does not come on.

•Is the unit pugged in?

– Plug the AC power cord firmly into the AC outlet.

Auto Power On/Standby does not function correctly.

•Signals are too weak or volume level is too low.

– This is not a malfunction. If this happens, cancel Auto Power On/Standby.

No sound is heard.

•Connections are incorrect, or loose.

–Check the connections. If incorrect, redo the corrections. (See pages 3.)

•Audio signals through the amplifier are extremely weak.

–Increase the volume level on the amplifier.

Sounds fluctuate (suddenly become loud or soft).

•The built-in protective circuit is working.

– Lower the volume level, then turn off and on the unit.

Suddenly no sound comes out. – the power lamp still lights in green.

•The volume of the playback source is too high.

– Turn down the volume of the playback source, turn off and on the source, then adjust the volume properly on the source.

Specifications

SP-PWE5

Type : Powered Subwoofer Bass-reflex type (magnetically shielded type)

Speaker : 16.0 cm cone ⋅ 1 Frequency Range : 25 Hz 200 Hz

Impedance : 4 Ω

Input terminals : INPUT (LOW-LEVEL)Power requirements : AC 240 V , 50 Hz

Output power of built-in amp : 60 W (70 Hz, 4 Ω, 10 % THD) Power Handling Capacity : 30 W

Dimensions

(W ⋅ H ⋅ D) : 214 mm ⋅ 299 mm ⋅ 340 mm Mass : 8.1 kg

Accessories : Monaural audio cord (⋅ 1)

SP-DWF10

Type : Powered Subwoofer Bass-reflex type (magnetically shielded type)

Speaker : 16.0 cm cone ⋅ 1 Frequency Range : 32 Hz 200 Hz

Impedance : 4 Ω

Input terminals : INPUT (LOW-LEVEL)Power requirements : AC 240 V , 50 Hz

Output power of built-in amp : 100 W (50 Hz, 4 Ω, 10 % THD) Power Handling Capacity : 27 W

Dimensions

(W ⋅ H ⋅ D) : 185 mm ⋅ 374 mm ⋅ 345 mm Mass : 8.86 kg

Accessories : Monaural audio cord (⋅ 1)

EN	0304NSMCREJSC
©2004 VICTOR COMPANY OF JAPAN LIMITED

SP-DWF10 specifications

The JVC SP-DWF10 is a remarkable addition to the world of home audio that showcases JVC's commitment to high-quality sound and innovative design. This subwoofer is engineered to deliver a deep, impactful bass experience that complements both dynamic movie soundtracks and nuanced music tracks, making it an exceptional choice for home theater setups and music lovers alike.

One of the standout features of the JVC SP-DWF10 is its high-efficiency amplifier, which provides 300 Watts of peak power. This combination allows for powerful bass output, ensuring that every low-frequency sound is rendered with clarity and depth. The subwoofer's robust build and sophisticated engineering make it capable of delivering tight and accurate bass responses, enhancing the overall audio experience without distortion, even at high volumes.

The JVC SP-DWF10 is designed with advanced bass reflex architecture, utilizing a front-firing port that optimizes airflow, allowing for greater sound reach and flexibility in setting placement. This design not only enables deep low frequencies but also expands the overall soundstage, so listeners can enjoy a fuller range of sound when watching movies or listening to music.

Additionally, it features a 10-inch cone woofer crafted from high-quality materials, ensuring durability and efficiency. The cone's design is intended to minimize unwanted resonances and vibrations, thus producing a clean sound signature that is free of muddiness, which can often plague lesser subwoofers.

Another key characteristic of the JVC SP-DWF10 is its ease of integration with existing audio systems. It offers low-level RCA inputs, making it compatible with virtually any AV receiver. Its adjustable crossover frequency and phase control provide users with the flexibility to tailor the subwoofer's output to their specific room acoustics and personal preferences.

Moreover, the JVC SP-DWF10 is built to last, featuring a sturdy cabinet construction that reduces vibration and enhances stability. The sleek design fits seamlessly into various home environments, catering to both aesthetics and functionality.

In summary, the JVC SP-DWF10 subwoofer encapsulates the essence of powerful bass and refined audio technology. With its high-efficiency amplifier, advanced bass reflex design, and user-friendly integration options, it stands out as a formidable option for anyone looking to elevate their audio experience to new heights. Whether for movie nights or musical enjoyment, the SP-DWF10 ensures that deep bass is always at your fingertips.