Only for SP-DWF10, To maintain the appearance of the unit

Thank you for purchasing a JVC speaker.

Before you begin using it, please read the instructions carefully to be sure you get the best possible performance. If you have any questions, consult your JVC dealer.

Warnings, Cautions and Others

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

Caution—POWER switch

This apparatus is provided with the POWER switch to minimize power consumption for safe use. Therefore,

1.Before doing initial settings, complete all the connections required, connect the mains plug into the wall outlet, then set the POWER switch to ON [ ❙ or ].

2.When not in use, set the POWER switch to OFF [ ‡ or ]. This disconnects the mains line.

Cautions

•Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

•Do not place any naked flame sources, such as lighted candles, on the apparatus.

•When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

•Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Precautions for installation

•To prevent deformation or discoloration of the cabinet, do not install the unit where it is exposed to direct sunlight or high humidity, and avoid installation near air conditioning outlets.

•Speaker vibrations may cause howling. Place the unit as far away from the player as possible.

•Take the occurrence of earthquakes or other physical shocks into consideration when selecting the installation place, and secure the unit thoroughly.

•Tuner reception may become noisy or hissing if this unit is installed nearby the tuner. In this case, leave a more distance between the tuner and this unit or use an outdoor antenna for better tuner reception without interference from this unit.

•This unit is magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the unit.

–When placing this unit near a TV set, turn off the TV’s main power switch or unplug it before installing this unit.

Then wait at least 30 minutes before turning on the TV’s main

power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move this unit away from the TV.

•Do not connect the AC power cord until all other connections have been made.

< Only for SP-DWF10 >

•When the TV screen shakes, move this unit away from the TV to find a position where the screen doesn't shake and then set the unit there.

Caution—Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1 Front:

No obstructions and open spacing.

2 Sides/ Top/ Back:

No obstructions should be placed in the areas shown by the dimensions below.

3 Bottom:

Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.

Front view		Side view	Front
	20 cm		20 cm

Precautions for Daily Use

•To maintain the appearance of the unit

Wipe with a dry, soft cloth if the cabinet or control panel should become dirty.

If very dirty, apply a small amount of water or neutral detergent to the cloth and wipe clean. Then wipe with a dry cloth.

•To improve the sound field

If the speakers are facing a solid wall or glass door, etc., it is recommended to furnish the wall with materials that absorb sounds, for example by hanging up thick curtains, to prevent reflections and standing waves.

Checking the Supplied Accessories

Check to be sure you have the following supplied accessories. The number in parenthesis indicates the quantity of the piece supplied.

•Monaural audio cord (1)

If the item mentioned above is missing, contact your dealer immediately.

15 cm

20 cm

10 cm

Contents
Warnings, Cautions and Others	2
Connections	3
Operations	3
Additional Information	4

– 2 –

SP-DWF10 specifications

The JVC SP-DWF10 is a remarkable addition to the world of home audio that showcases JVC's commitment to high-quality sound and innovative design. This subwoofer is engineered to deliver a deep, impactful bass experience that complements both dynamic movie soundtracks and nuanced music tracks, making it an exceptional choice for home theater setups and music lovers alike.

One of the standout features of the JVC SP-DWF10 is its high-efficiency amplifier, which provides 300 Watts of peak power. This combination allows for powerful bass output, ensuring that every low-frequency sound is rendered with clarity and depth. The subwoofer's robust build and sophisticated engineering make it capable of delivering tight and accurate bass responses, enhancing the overall audio experience without distortion, even at high volumes.

The JVC SP-DWF10 is designed with advanced bass reflex architecture, utilizing a front-firing port that optimizes airflow, allowing for greater sound reach and flexibility in setting placement. This design not only enables deep low frequencies but also expands the overall soundstage, so listeners can enjoy a fuller range of sound when watching movies or listening to music.

Additionally, it features a 10-inch cone woofer crafted from high-quality materials, ensuring durability and efficiency. The cone's design is intended to minimize unwanted resonances and vibrations, thus producing a clean sound signature that is free of muddiness, which can often plague lesser subwoofers.

Another key characteristic of the JVC SP-DWF10 is its ease of integration with existing audio systems. It offers low-level RCA inputs, making it compatible with virtually any AV receiver. Its adjustable crossover frequency and phase control provide users with the flexibility to tailor the subwoofer's output to their specific room acoustics and personal preferences.

Moreover, the JVC SP-DWF10 is built to last, featuring a sturdy cabinet construction that reduces vibration and enhances stability. The sleek design fits seamlessly into various home environments, catering to both aesthetics and functionality.

In summary, the JVC SP-DWF10 subwoofer encapsulates the essence of powerful bass and refined audio technology. With its high-efficiency amplifier, advanced bass reflex design, and user-friendly integration options, it stands out as a formidable option for anyone looking to elevate their audio experience to new heights. Whether for movie nights or musical enjoyment, the SP-DWF10 ensures that deep bass is always at your fingertips.