Precautions for installation

ENGLISH

•To prevent deformation or discoloration of the cabinet, do not install the unit where it is exposed to direct sunlight or high humidity, and avoid installation near air conditioning outlets.

•Speaker vibrations may cause howling. Place the unit as far away from the player as possible.

•Take the occurrence of earthquakes or other physical shocks into consideration when selecting the installation place, and secure the unit thoroughly.

•Tuner reception may become noisy or hissing if this unit is installed nearby the tuner. In this case, leave a more distance between the tuner and this unit or use an outdoor antenna for better tuner reception without interference from this unit.

•This unit is magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the unit.

–When placing this unit near a TV set, turn off the TV’s main power switch or unplug it before installing this unit. Then wait at least 30 minutes before turning on the TV’s main power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move this unit away from the TV.

•When the TV screen shakes, move this unit away from the TV to find a position where the screen doesn’t shake and then set the unit there.

•Do not connect the AC power cord until all other connections have been made.

Precautions for Daily Use

•To maintain the appearance of the unit

Wipe with a dry, soft cloth if the cabinet or control panel should become dirty.

If very dirty, apply a small amount of water or neutral detergent to the cloth and wipe clean. Then wipe with a dry cloth.

•To improve the sound field

If the speakers are facing a solid wall or glass door, etc., it is recommended to furnish the wall with materials that absorb sounds, for example by hanging up thick curtains, to prevent reflections and standing waves.

Checking the Supplied Accessories

Check to be sure you have the following supplied accessories.

The number in parenthesis indicates the quantity of the piece supplied.

•Monaural audio cord (1)

•AC plug adaptor (1)

If the item mentioned above is missing, contact your dealer immediately.

Contents
Warnings, Cautions and Others	2
Connections	6
Additional Information	6
Operations	7

ESPAÑOL

Precauciones sobre la instalación

•Para evitar la deformación o la alteración de color de la caja, no instale la unidad en un sitio expuesto a la luz directa del sol o a la alta humedad ni cerca de las bocas de salidas del aire acondicionado.

•Las vibraciones del altavoz pueden producir aullido. Coloque la unidad lo más lejos posible del tocadiscos.

•Al decidir el sitio de instalación de la unidad, tenga en cuenta las eventualidades tales como los terremotos y otros golpes físicos y asegúrela firmemente para evitar que se voltee.

•Si instalara esta unidad cerca del sintonizador, se podrían producir ruidos o silbidos en la recepción del sintonizador. En tal caso, deje una distancia mayor entre el sintonizador y esta unidad, o utilice una antena exterior para mejorar la recepción, y prevenir las interferencias de esta unidad.

•Esta unidad está blindada magnéticamente para evitar distorsiones de color en los televisores. Sin embargo, si no está correctamente instalada, se podrían producir distorsiones de color. Por lo tanto, preste atención a lo siguiente cuando se instale la unidad.

–Si va a instalar esta unidad cerca de un televisor, desconecte el interruptor de alimentación principal del televisor o desenchúfelo antes de instalar esta unidad. Luego espere por lo menos 30 minutos antes de volver a conectar el interruptor de alimentación principal del televiso.

Aunque siga las instrucciones de arriba, algunos televisores podrían ser afectados. En tal caso, aleje esta unidad del televisor.

•Cuando vibre la pantalla del televisor, separe esta unidad del televisor para encontrar una posición donde la pantalla no vibre, y luego ponga la unidad en esa posición.

•No conecte el cable de alimentación de CA hasta que se hayan realizado todas las demás conexiones.

Precauciones durante el uso diario

•Para mantener la apariencia de la unidad

Si se ensucia la caja o el panel de control, limpie con un paño suave y seco.

Si está muy sucio, limpie con un paño humedecido con agua o detergente neutro, y seque con un paño seco.

•Mejoramiento del campo acústico

Si los altavoces están dirigidos hacia una pared maciza o una puerta de vidrio, etc., se recomienda revestir la pared con materiales amortiguadores de sonido, por ejemplo, instalando cortinas pesadas, para evitar reverberaciones y ondas estacionarias.

Comprobación de los accesorios suministrados

Compruebe que dispone del siguiente accesorio suministrado.

El número entre paréntesis indica la cantidad de piezas suministradas.

•Cordón de audio monofónico (1)

•Adaptador para clavija de CA (1)

Si no se le ha suministrado el elemento mencionado arriba, póngase inmediatamente en contacto con su concesionario.

Contenido
Advertencias, precauciones y notas	2
Conexiones	6
Operaciones	6
Información adicional	7

– 3 –

SP-DWF10 specifications

The JVC SP-DWF10 is a remarkable addition to the world of home audio that showcases JVC's commitment to high-quality sound and innovative design. This subwoofer is engineered to deliver a deep, impactful bass experience that complements both dynamic movie soundtracks and nuanced music tracks, making it an exceptional choice for home theater setups and music lovers alike.

One of the standout features of the JVC SP-DWF10 is its high-efficiency amplifier, which provides 300 Watts of peak power. This combination allows for powerful bass output, ensuring that every low-frequency sound is rendered with clarity and depth. The subwoofer's robust build and sophisticated engineering make it capable of delivering tight and accurate bass responses, enhancing the overall audio experience without distortion, even at high volumes.

The JVC SP-DWF10 is designed with advanced bass reflex architecture, utilizing a front-firing port that optimizes airflow, allowing for greater sound reach and flexibility in setting placement. This design not only enables deep low frequencies but also expands the overall soundstage, so listeners can enjoy a fuller range of sound when watching movies or listening to music.

Additionally, it features a 10-inch cone woofer crafted from high-quality materials, ensuring durability and efficiency. The cone's design is intended to minimize unwanted resonances and vibrations, thus producing a clean sound signature that is free of muddiness, which can often plague lesser subwoofers.

Another key characteristic of the JVC SP-DWF10 is its ease of integration with existing audio systems. It offers low-level RCA inputs, making it compatible with virtually any AV receiver. Its adjustable crossover frequency and phase control provide users with the flexibility to tailor the subwoofer's output to their specific room acoustics and personal preferences.

Moreover, the JVC SP-DWF10 is built to last, featuring a sturdy cabinet construction that reduces vibration and enhances stability. The sleek design fits seamlessly into various home environments, catering to both aesthetics and functionality.

In summary, the JVC SP-DWF10 subwoofer encapsulates the essence of powerful bass and refined audio technology. With its high-efficiency amplifier, advanced bass reflex design, and user-friendly integration options, it stands out as a formidable option for anyone looking to elevate their audio experience to new heights. Whether for movie nights or musical enjoyment, the SP-DWF10 ensures that deep bass is always at your fingertips.